X-KEYS Macro Recorder v1.0.1.0
October 21, 2004
(C) Copyright 2002-2004 P.I. Engineering, Inc. All rights reserved

Thank you for purchasing or evaluating X-keys Macro Recorder.  X-keys Macro Recorder is designed to run on Windows 98, ME, 2000 and XP.  X-keys Macro Recorder will work with all USB X-keys devices in Memory Resident Mode.

X-keys Macro Recorder is a utility for programming individual keys into a "layout" and writing them to an X-keys device.  Previously programmed X-keys may also be read in and modified using this utility.

Installation:

1. Unplug any X-keys USB devices from your system.
2. Insert the X-keys Macro Recorder CD into your CD ROM drive. 
3. If autorun doesn't start automatically, double click on the MacroRecorderSetup.exe on the CD.
4. Follow the Installation Wizard directions to install the program and load the driver, if it is absent.
5. If you have a previous installation of the X-keys Macro Recorder, select "Completely Remove X-keys Macro Recorder". Then when Install Shield finds the exisiting files, click "Yes" to remove them.
6. Wait for the hour glass to disappear before selecting the option to restart your computer.
7. Wait for the system to completely load (icons appear on the desktop).
8. Plug the X-keys into the USB port. On Windows 98 the Add New Hardware Wizard will appear, if the driver was not present prior to the installation, or it was uninstalled and re-installed during the installation.  Follow the instructions.  When prompted to insert the Windows 98 CD, click "Browse" to "system32\drivers\" under your Windows directory ( normally as C:\Windows\ or C:\Winnt\) and click OK.
9. Switch the X-keys into programming mode, (switch up, red dot visible on standard X-keys).
10. Windows will recognize the X-keys as new hardware and finish installing the programming driver.

NOTE: There should be only one X-keys USB device connected to your system at any time when X-keys Macro Recorder is running. 

Feel free to contact our technical department if you have further questions: tech@xkeys.com, 1-800-628-3185 or 517-655-5523.

To uninstall:
Follow the directions for installation and select "Completely Remove X-keys Macro Recorder" when prompted or use the "Add/Remove Programs" option in Windows Control Panel.

P.I. Engineering, Inc.
101 Innovation Parkway
Williamston, MI 48895
1-800-628-3185 or 517-655-5523
http://www.xkeys.com

